A kitchen sink tap can be one of the household fittings that many homeowners can fit or change for themselves. The tasks of reinstallation are just as simple as whether your faucet is broken and needs replacement, it’s time for something new, or you wish to change the style. This can be efficiently done by dedicating some time and using essential tools. This article by https://www.plumbersingapore.org/our-services/ will instruct you on changing and installing kitchen sink taps.
Turn Off the Water Supply
First and foremost, the water supply must be off to prevent any mess from water spills. Shut-off valves can be hidden behind the sink. The cold and hot water valves had to be turned clockwise to stop water. If the sink has no shut-off valves, the main water supply to the house will have to be turned off.
Click here to know more about this topic at https://www.plumbersingapore.org/kitchen-sink-taps-faucet-installation-replacement/.
Gather Necessary Tools
Having the appropriate tools facilitates the process of undertaking or substituting a faucet. In this case, an adjustable spanner that helps loosen threaded parts to loosen pipes and a basin wrench, plumber tape, and a screwdriver are required. If a pale bathroom faucet is being changed, then it is a process that will involve a blow torch or a utility knife to cut through any sealant.
Remove the Old Faucet
If you are changing the faucet that is in place, first remove the old one. The water supply lines beneath the sink should be removable first. Locate and remove the nuts that secure the water supply pipes to the inlet of the faucet using the spanner. After the water lines have been disconnected, search for the bolts holding the faucet above the sink. Accordingly, the bolts should be cooled, and careful untangling of his head should be carried out.
Install the New Faucet
Now it’s time to fix the new faucet. Start by placing the rubber gasket or mounting plate (if included) over the holes in the sink. These assist in making water-tight seals. Next, pass the faucet over the mounting holes, ensuring proper alignment. Use your hand to twist the nuts on the faucet’s threaded rods from the base of the sink. Now with the basin wrench, tighten the nuts, but do not overdo it.
Connect The Water Supply Lines.
The water supply lines can be reconnected once the faucet is securely in place. If you are fixing the faucet for the first time, new supply lines will have to be fitted to the shut-off valves, and then the supply lines will be fixed onto the faucet. This ensures a great fit and prevents any leakage. An adjustable wrench should tighten the nuts; avoid over-tightening, as this may damage the threads.
As your last step, it is time to connect everything and check the faucet you have installed. Go back to the sink and open the shut-off valves below the sink to restore the water supply. Now, gently turn on the faucet to test for any water leaks. If you see water starting to drip and leak from the connectors. Then, with the help of a wrench, you must further extrude and protect the nuts.
Necessary Adjustments
After the new faucet has been fitted, it is appropriate to turn the handles or set the spray whenever you desire. Verify that the smooth flow of water is maintained and both hot and cold water are functional. When pulling down the faucet’s spray head, verify the same function is adhered to test the completeness of the implementation guide completion. This last check ensures that all the requirements necessary for correct and efficient implementation have been met.
